Skip to content

Tripp Lite B127A-1A1-BDBD DisplayPort over Cat6 Extender Kit, KVM Support, USB, 4K, DP1.2a, PoC, HDCP 2.2, 230 ft. (70 m), TAA

Your price £219.59
Out of stock
DisplayPort over Cat6 Extender Kit, KVM Support, USB, 4K, DP1.2a, PoC, HDCP 2.2, 230 ft. (70 m), TAA
View full product details
Sign in or register your company account to unlock exclusive benefits:
  • Shop top tech from leading brands
  • Order by 3pm for next day delivery
  • 24/7 account access

More Information


DisplayPort Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. Extends a 4K A/V Transmission up to 230 ft. The B127A-1A1-BDBD extends 4K signals from a DisplayPort source device to a DisplayPort monitor up to 230 feet (70 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 feet (122 meters) or 460 feet (140 meters), respectively. Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color The B127A-1A1-BDBD supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 30 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display. Local HDMI Port on Transmitter Supports 4K @ 30 Hz Resolution To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/30 Hz to function properly. Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet. DIP Switch Extends Your Choice of Either USB or IR The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time. Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite’s P580-Series). Then, connect the receiver to the display with another user-supplied DisplayPort cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). TAA-Compliant for GSA Schedule Purchases The B127A-1A1-BDBD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.


  • Sustainability compliance
  • Sustainability certificates
  • Master (outer) case width
    573 mm
  • Master (outer) case length
    273 mm
  • Master (outer) case height
    175 mm
  • Master (outer) case gross weight
    7.9 kg
  • Products per master (outer) case
    10 pc(s)
  • Master (outer) case GTIN (EAN/UPC)
  • Type
    AV transmitter & receiver
  • Maximum resolution
    3840 x 2160 pixels
  • Cable types supported
    Cat5, Cat5e, Cat6, HDMI
  • Maximum transfer distance
    70.1 m
  • Audio system
  • Extended display identification data (EDID)
  • Audio output channels
    7.1 channels
  • LED indicators
  • HDCP
  • Material
  • Colour depth
    36 bit
  • 3D
  • Consumer Electronics Control (CEC) support
  • Wall mountable
  • HDCP version
  • Product colour
  • Connectivity technology
  • Ethernet LAN
  • RJ-45 input ports
  • RJ-45 output ports
  • Number of HDMI outputs
  • HDMI version
  • DisplayPorts in
  • DisplayPorts out
  • USB ports quantity
  • USB version
  • USB connector type
    Micro-USB, USB Type-A
  • Digital audio optical out
  • Remote (IR) input
  • Remote (IR) output
  • DC-in jack
  • AC input voltage
    100 - 240 V
  • AC input frequency
    50-60 Hz
  • Operating voltage
    24 V
  • Input current
    0.6 A
  • Output current
    1 A
  • External power adapter
  • Operating temperature (T-T)
    0 - 40 °C
  • Storage temperature (T-T)
    -15 - 50 °C
  • Operating relative humidity (H-H)
    0 - 85%
  • Receiver dimensions (WxDxH)
    115 x 62.4 x 27 mm
  • Receiver weight
    453.6 g
  • Transmitter dimensions (WxDxH)
    115 x 62.4 x 27 mm
  • Transmitter weight
    453.6 g
  • Package width
    260.1 mm
  • Package depth
    164.1 mm
  • Package height
    55.1 mm
  • Package weight
    450 g
  • Package type
  • Country of origin
  • Warranty Info
    1-year limited


Write Your Own Review
You're reviewing:Tripp Lite B127A-1A1-BDBD DisplayPort over Cat6 Extender Kit, KVM Support, USB, 4K, DP1.2a, PoC, HDCP 2.2, 230 ft. (70 m), TAA