Highlights
The B160-201-HSI 2-Port HDMI over IP Transmitter/Receiver/Extender Kit extends and distributes HDMI audio/video, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328.08-ft. (100 m) away, which is more than 200-ft. (60.96 m) farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite's NG5, you can continue extending the distance between source and display up to 328.08-ft. (100 m) per switch. Two HDMI outputs on the receiver allow the connection of two displays. Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by including dedicated managed Ethernet network switches** with Internet Group Management Protocol (IGMP), such as Tripp Lite's NSS-G16D2. With a compatible B160-Series receiver, you can send the HDMI video source to any analog or digital display, including VGA and DisplayPort™, allowing you to mix and match technologies and use existing monitors. The IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays. The B160-201-HSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz in a point-to-multipoint switch installation. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps. The transmitter and receiver units mount to a wall, rack or pole using the including hardware. *Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch. **B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance. Extends and Distributes HDMI A/V, Serial and IR Control Signals over Cat5/6 Cabling Converts audio/video to an IP-based signal that is transmitted point-to-point to a display 328.08-ft. (100 m) away Add low-cost network switches between transmitter and receiver to continue extending distance up to 328.08-ft. (100 m) per switch Dual HDMI outputs on receiver for connecting 2 displays HDMI output on transmitter for connecting a local display Create a Multi-In, Multi-Out Installation Using B160-Series Transmitters and Receivers Connect up to 64 transmitters and 255 receivers through multiple dedicated managed network switches IGMP-enabled switches allow centralized control over which sources show on which displays Video source can be sent to any analog or digital display, so you can mix and match technologies and use existing monitors Enhanced Technical Features Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz Uses H.264 video compression standard Transmits on 20-60 kHz IR frequency Extends IR control signals that control a source from a remote display Supports RS-232 serial baud rates up to 57600 Bps HDCP and 3D compatible Plug-and-Play Functionality No software or drivers required Hardware included for mounting on wall, rack or pole TAA-Compliant Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchasesSpecifications
- Type AV transmitter & receiver
- Maximum resolution 1920 x 1080 pixels
- Maximum transfer distance 200 m
- Maximum refresh rate 60 Hz
- LED indicators Y
- Supported video modes 480i, 480p, 720p, 1080i, 1080p
- Supported graphics resolutions 640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1440 x 900, 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080)
- Video compression formats H.264
- HDCP Y
- 3D Y
- Product colour Black
- RJ-45 input ports 1
- RJ-45 output ports 1
- HDMI in 2
- Number of HDMI outputs 2
- RS-232 input ports 1
- AC input voltage 100-240 V
- AC input frequency 50 - 60 Hz
- Operating voltage 5 V
- Input current 0.5 A
- Output current 2 A
- External power adapter Y
- Package width 342.9 mm
- Package depth 149.9 mm
- Package height 83.8 mm
- Package weight 1.54 kg
- Cables included AC, Audio (3.5mm), IR
- Manual Y
- Mounting brackets included Y
- Country of origin Taiwan
- Sustainability certificates RoHS
- Master (outer) case width 439.4 mm
- Master (outer) case length 363.2 mm
- Master (outer) case height 325.1 mm
- Master (outer) case gross weight 15.9 kg
- Products per master (outer) case 10 pc(s)
- Master (outer) case GTIN (EAN/UPC) 20037332196815
- Warranty Info 1-year limited
