Specifications
- Switch type Managed
- Switch layer L3
- Quality of Service (QoS) support Y
- Web-based management Y
- MIB support MIB II RFC 1213 MIB
- SFP+ module slots quantity 24
- Console port RJ-45
- USB 2.0 ports quantity 1
- Networking standards IEEE 802.1ab, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
- 10G support Y
- Flow control support Y
- Link aggregation Y
- Rate limiting Y
- Spanning tree protocol Y
- VLAN support Y
- Number of VLANs 4096
- MAC address table 160000 entries
- Switching capacity 1280 Gbit/s
- Throughput 960 Mpps
- Latency (10 Gbps) 0.850 µs
- Number of queues 8
- Jumbo frames support Y
- Access Control List (ACL) Y
- IGMP snooping Y
- Security algorithms 802.1x RADIUS, SSH-2
- Multicast support Y
- Management protocols sFlow, RMON, SNMP v1/v2c/v3, NTP, Telnet, RSPAN
- Supported network protocols IPv4/IPv6
- Rack mounting Y
- Form factor 1U
- Product colour Black
- LED indicators Y
- Safety CAN/CSA C22.2 No. 60950-1-07, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, GB 4943.1-2011, GB9254-2008, CNS14336-1(99)
- Electromagnetic compatibility FCC Class A, ICES-003 Class A, VCCI-Class A, CE, C-Tick, BSMI, GOST, KCC Class A, CCC
- Certification ANSI C63.4 ICES-003 Class A CISPR22 / JEIDA EN55022 Class A / EN55024 CISPR22 AS/NZS CISPR22 CNS 13438(95) 51318.22-99 / 51318.24-99 KN22 / KN24 GB17625.1-2003 RoHS
- Firmware upgradeable Y
- Redundant power supply (RPS) support Y
- Number of power supply units 2
- AC input voltage 85 - 264 V
- AC input frequency 50 - 60 Hz
- Power consumption (typical) 110 W
- Power over Ethernet (PoE) N
- Operating temperature (T-T) 0 - 40 °C
- Storage temperature (T-T) -25 - 70 °C
- Operating relative humidity (H-H) 10 - 85%
- Storage relative humidity (H-H) 10 - 90%
- Operating altitude 0 - 3048 m
- Width 439.9 mm
- Depth 161.4 mm
- Height 43.2 mm
- Weight 8.66 kg
