Highlights
Tripp Lite's SVX210KL7P 210kVA / 210kW SmartOnline large-chassis UPS includes installed Input, Bypass and Output breakers, a Static Transfer Switch (STS) and 7 included 30kVA SVX30PM power modules. The system includes space for 1 additional user installable SVX30PM power module for N+1 fault-tolerance. Featuring modular, scalable design with high efficiency voltage and frequency independent / VFI operation, Tripp Lite's SVX Series SmartOnline UPS systems are ideal for the protection of a wide variety of critical IT systems. Scalable, modular configuration enables UPS capacity upgrades and hot-swap power supply maintenance without costly downtime. Over 95% efficient in standard online-mode and over 99% efficient in optional economy-mode enables reduced operating and cooling costs. Unity power factor configuration provides equal kVA and kW output ratings for up to 25% more wattage capacity than common 0.8 - 0.9 power factor competing designs. Network-grade sine-wave AC output with 1% output voltage regulation and less than 1.5% output total harmonic distortion. Advanced IGBT inverter with Digital Signal Processor (DSP) technology provides for less than 3% input total harmonic distortion (THDi) to support 1:1 generator sizing. Dual input hardwire design enables operation from one or two input power sources for enhanced system availability. N+1 fault-tolerance is supported anytime there is an "extra" SVX30PM 30kW power module installed beyond the minimum required quantity. Automatic and manual bypass options keep connected equipment operational during routine maintenance or critical power module failure. UPS batteries are not included, External ±240VDC battery cabinets sold separate. Tripp Lite's SVX210KL7P 210kVA / 210kW SmartOnline UPS offers network-grade power protection in a highly-configurable large-chassis modular, scalable form factor Supports 220/380, 230/400 or 240/415V AC, 3-Phase Wye 4-Wire plus Earth Hardwire input and output wiring Tested to CE for worldwide applications Open slot for 1 additional SVX30PM 30kW power module enables 210kVA capacity with enhanced N+1 reliability Pre-installed WEBCARDLX with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations Serial port enables unattended shutdown and UPS monitoring ability Modular configuration with hot-swappable power modules enables easy and fast maintenance with zero downtime Wide input voltage operating range enables full continuous online operation during brownouts as low as 120V (Ph-N) and overvoltages up to 276 (Ph-N) Narrow output voltage operating range regulates output voltage within 1% of the selected 220/230/240 nominal output voltage in online, double-conversion mode Over 95% efficient in online, double-conversion mode and over 99% efficient in optional economy-mode enables reduced operating and cooling costs Less than 3% input Total Harmonic Distortion (THDi) prevents the need to oversize generator systems relative to UPS capacity Dual hardwire input design enables operation from one or two input power sources N+1 fault tolerance is supported anytime there is an “extra” SVX30PM 30kW power module installed beyond the minimum required quantity (for example, this UPS provides N+1 fault-tolerance when loaded to 180kVA or less; Loads of 180-210kVA are fully supported, but without N+1 fault tolerance) Front panel combination LCD/LED display offers full UPS condition and status reporting plus additional configuration optionsSpecifications
-
UPS topology
Double-conversion (Online)
-
Output power capacity
210 kVA
-
Output power
210000 W
-
Waveform
Sine
-
Input operation voltage (min)
220 V
-
Input operation voltage (max)
415 V
-
Input frequency
50/60 Hz
-
Output operation voltage (min)
220 V
-
Output operation voltage (max)
415 V
-
Output frequency regulation
±0.05 Hz
-
Output voltage regulation
1%
-
Maximum current
303 A
-
Surge energy rating
2496 J
-
Number of input phases
3
-
Number of output phases
3
-
Efficiency
99%
-
Power factor
1
-
Input power factor
0.99
-
Crest factor
3:1
-
Emergency Power Off (EPO)
Y
-
Output voltage Total Harmonic Distortion (THD)
4%
-
Input current Total Harmonic Distortion (THD)
3%
-
EMI/RFI noise filtering
Y
-
Power protection features
Short circuit
-
Audible alarm(s)
Y
-
Audible alarm modes
Alarm when on battery, Fault, Low battery alarm
-
Country of origin
China
-
Emergency Power Off (EPO) connector
Y
-
Cold start
Y
-
Form factor
Tower
-
Product colour
Black
-
Housing material
Steel
-
Cooling type
Active
-
Display type
LCD
-
Operating temperature (T-T)
0 - 40 °C
-
Storage temperature (T-T)
-15 - 60 °C
-
Operating relative humidity (H-H)
0 - 95%
-
Sustainability certificates
RoHS
-
Width
490 mm
-
Depth
736.3 mm
-
Height
2009.9 mm
-
Weight
274.3 kg
-
Package width
579.9 mm
-
Package depth
870 mm
-
Package height
2174.7 mm
-
Package weight
335.5 kg
-
Master (outer) case width
579.9 mm
-
Master (outer) case length
870 mm
-
Master (outer) case height
249.9 mm
-
Master (outer) case gross weight
38.1 kg
-
Products per master (outer) case
1 pc(s)
