Skip to content

Tripp Lite B127A-002-BHPH2 2-Port HDMI over Cat6 Extender Kit, Splitter/2x Pigtail Receivers - 4K 60 Hz, HDR, 4:4:4, PoC, 230 ft. (70.1 m), TAA

Your price £209.92
Out of stock
2-Port HDMI over Cat6 Extender Kit, Splitter/2x Pigtail Receivers - 4K 60 Hz, HDR, 4:4:4, PoC, 230 ft. (70.1 m), TAA
View full product details

More Information


HDMI Dual-Output Extender Kit Ideal for Digital Signage in Schools and Workplaces This 4K splitter/receivers combo is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. Extends a 4K A/V Transmission up to 230 ft... or Even Farther The included splitter connects to both included pigtail receivers to extend 4K signals from an HDMI source to two HDMI displays up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding Tripp Lite B127A-010-H signal repeaters (sold separately) to the application, you can extend the signal to each connected display up to 400 feet (121.9 meters). Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color The B127A-002-BHPH2 supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with true uncompressed 7.1-channel digital audio and Dolby TrueHD. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. Advanced 4:4:4 chroma subsampling is ideal for top-level PC gaming or using your HDTV as a PC monitor. Multi-Resolution Support Allows Mixing and Matching of Displays of Different Resolutions Say you have a brand new 4K/60 Hz HDTV in one room, but want to also connect your Blu-ray player or satellite box to an older 1080p TV in another room. The B127A-002-BHPH2 is backward compatible with 4K/30 Hz and 1080p resolutions via automatic switching, allowing each connected monitor to display video at its maximum resolution. Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks Power over Cable (PoC) technology powers the connected receivers over Cat6 cable. LEDs indicate when the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receivers where needed without worrying about finding a nearby AC outlet. Plug-and-Play Operation for Quick Setup and Immediate Use The splitter and receivers work right out of the package with no software required. Mounting hardware is included for installing the splitter on a wall, pole or 19-inch rack. Connect the splitter to an HDMI source device with a user-supplied HDMI cable (such as Tripp Lite’s P568- or P569-Series). The receivers’ pigtail HDMI connectors plug directly into a 4K display. TAA-Compliant for GSA Schedule Purchases The B127A-002-BHPH2 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.


  • Type
    AV transmitter & receiver
  • Maximum resolution
    3840 x 2160 pixels
  • Cable types supported
    Cat6, HDMI
  • Maximum transfer distance
    70 m
  • Audio system
  • Extended display identification data (EDID)
  • Audio output channels
    7.1 channels
  • LED indicators
  • Supported video modes
    720p, 1080p, 2160p
  • Supported graphics resolutions
    1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160
  • Cable length
    1.38 m
  • HDCP
  • Material
  • Colour depth
    36 bit
  • 3D
  • Rack mounting
  • Consumer Electronics Control (CEC) support
  • HDCP version
  • Product colour
    Black, Grey
  • Connectivity technology
  • Ethernet LAN
  • RJ-45 input ports
  • RJ-45 output ports
  • HDMI in
  • Number of HDMI outputs
  • HDMI version
  • DC-in jack
  • AC input voltage
    100 - 240 V
  • AC input frequency
    50/60 Hz
  • Operating voltage
    24 V
  • Output current
    1 A
  • Operating temperature (T-T)
    0 - 40 °C
  • Storage temperature (T-T)
    -15 - 50 °C
  • Operating relative humidity (H-H)
    0 - 85%
  • Storage relative humidity (H-H)
    0 - 85%
  • Receiver dimensions (WxDxH)
    47 x 75 x 18.6 mm
  • Receiver weight
    450 g
  • Transmitter dimensions (WxDxH)
    115 x 62.4 x 27 mm
  • Transmitter weight
    450 g
  • Quantity per pack
    1 pc(s)
  • Package width
    352 mm
  • Package depth
    164.1 mm
  • Package height
    55.1 mm
  • Package weight
    1.03 kg
  • Package type
  • AC adapter included
  • Included power plug types
    AU, EU, NA, UK
  • Manual
  • Mounting kit
  • Country of origin
  • Sustainability compliance
  • Sustainability certificates
  • Master (outer) case width
    586 mm
  • Master (outer) case length
    374.9 mm
  • Master (outer) case height
    197.1 mm
  • Master (outer) case gross weight
    11.1 kg
  • Products per master (outer) case
    10 pc(s)
  • Master (outer) case GTIN (EAN/UPC)
  • Warranty Info
    1-year limited


Write Your Own Review
You're reviewing:Tripp Lite B127A-002-BHPH2 2-Port HDMI over Cat6 Extender Kit, Splitter/2x Pigtail Receivers - 4K 60 Hz, HDR, 4:4:4, PoC, 230 ft. (70.1 m), TAA