Highlights
The B150-1A1-HDMI DisplayPort to HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit and a receiver unit that work in tandem to convert a DisplayPort audio/video signal to HDMI and then extend it to a projector, monitor or television up to 150-ft. (45.72 m) away. The kit is ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than convention cables allow. One Cat5e/6 cable connects the transmitter and receiver (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). A built-in DisplayPort cable connects the transmitter to the source, while a built-in HDMI cable connects the receiver to the display. The built-in HDMI cable features a latching connector that helps prevent accidental disconnection. Included USB Micro-B cables connect the transmitter to a USB port on the DisplayPort computer or a USB wall charger (such as Tripp Lite's U280-002-W12), and connect the receiver to a USB port on the HDMI display or a USB wall charger. No external power supplies are needed. The B150-1A1-HDMI can extend a high-definition 1080i (60 Hz) signal up to 150-ft. (45.72 m) and a 1080p (60 Hz) signal up to 125-ft. (38.1 m). In addition to crystal-clear video, including 24-bit True Color (8 bits per channel), the kit delivers full, rich stereo. Green and orange LEDs on both units indicate when they are receiving power from the USB Micro-B cables and sharing a signal. Easy to set up with no software or drivers to install. Works with all operating systems. Converts DisplayPort Signal to HDMI, Extends It Up to 150-ft. (45.72 m) Ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than convention cables allow Extends a high-definition 1080i (60 Hz) signal up to 150-ft. (45.72 m) and a 1080p (60 Hz) signal up to 125-ft. (38.1 m) Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series) Supports 24-bit True Color (8 bits per channel) and stereo audio HDCP 1.3 compliant Built-in HDMI cable with latching connector helps prevent accidental disconnection Easy to Set Up and Use Plug-and-play engineering—no software or drivers to download and install Works with all operating systems Built-in cables connect transmitter to DisplayPort source and receiver to HDMI display Included USB Micro-B cables supply external power to the units LEDs indicate when the units are receiving power and sharing a signal TAA-Compliant Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchasesSpecifications
-
Type
AV transmitter & receiver
-
Maximum resolution
1600 x 1200 pixels
-
Cable types supported
Cat5, Cat6
-
Maximum transfer distance
45 m
-
Supported video modes
480i, 480p, 720p, 1080i, 1080p
-
Supported graphics resolutions
640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1440 x 900, 1600 x 1200 (UXGA)
-
Colour depth
24 bit
-
Plug and Play
Y
-
Product colour
Black
-
Certification
TAA
-
RJ-45 input ports
2
-
HDMI in
1
-
USB ports quantity
2
-
USB connector type
USB Type-A
-
Package width
199.9 mm
-
Package depth
142 mm
-
Package height
43.9 mm
-
Package weight
220 g
-
Cables included
Micro-USB
-
Manual
Y
-
Quantity
1
-
Country of origin
Taiwan
-
Sustainability certificates
RoHS
-
Master (outer) case width
455.9 mm
-
Master (outer) case length
213.1 mm
-
Master (outer) case height
152.9 mm
-
Master (outer) case gross weight
2.45 kg
-
Products per master (outer) case
10 pc(s)
-
Master (outer) case GTIN (EAN/UPC)
10037332190113
-
Warranty Info
1-year limited