Highlights
Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX700HG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps.
This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15-centimeter (six-inch) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules.
The SMX700HG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with free downloadable PowerAlert® software for safe, unattended system shutdown in the event of a prolonged power failure.
This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMX700HG in this type of application will void the battery warranty.
Good to know
Features
-
Audible alarm(s)
No
-
Auto power off
No
-
Auto shut-off
No
-
Auto-restart
No
-
Automatic Voltage Regulation (AVR)
No
Ports & interfaces
-
AC outlet types
C13 coupler
-
AC outlets quantity
6.000000
-
Emergency Power Off (EPO) connector
No
-
Power plug
C14 coupler
-
RS-232 ports
1.000000
Battery
-
Automatic battery test
No
-
Battery recharge time
3.600000
-
Cold start
No
-
Hot-swap battery
No
-
Off-mode charging
No
Product Design
-
Built-in fan
No
-
Cable length
1.830000
-
Certification
CE/IEC 60601-1, FCC B
-
Cooling type
Active
-
Housing material
Polyvinyl chloride (PVC)