on your rights under the UK GDPR.
Highlights
Availability Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Scalable runtime Allows additional run time to be quickly added as needed. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Manageability Serial connectivity Provides management of the UPS via a serial port. LED status indicators Quickly understand unit and power status with visual indicators. Network manageable Provides remote power management of the UPS over the network. SmartSlot Customize UPS capabilities with management cards. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. Adaptability Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power and UPS power conditions Protection Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Marketing Features Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards. Avoids costly power problems by keeping your IT equipment and data protected and available. Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events. Low operating and maintenance costs with proven reliability and intelligent battery management. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Save time with easy and convenient remote accessibility. Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.Specifications
-
UPS topology
Double-conversion (Online)
-
Output power capacity
1 kVA
-
Output power
900 W
-
Waveform
Sine
-
Input operation voltage (min)
220 V
-
Input operation voltage (max)
240 V
-
Input frequency
40/70 Hz
-
Output operation voltage (min)
220 V
-
Output operation voltage (max)
240 V
-
Output frequency
50/60 Hz
-
Surge energy rating
340 J
-
Crest factor
3:1
-
Emergency Power Off (EPO)
Y
-
Noise level
50 dB
-
Surge protection
Y
-
Audible alarm(s)
Y
-
Auto-restart
Y
-
AC outlet types
C13 coupler
-
Power plug
C14 coupler
-
AC outlets quantity
8 AC outlet(s)
-
USB port
Y
-
Serial interface
Y
-
Serial interface type
RJ-45
-
Serial ports quantity
1
-
SmartSlot
Y
-
Battery technology
Lithium-Ion (Li-Ion)
-
Battery life (max)
10 year(s)
-
Battery recharge time
6 h
-
Hot-swap battery
Y
-
Automatic battery test
Y
-
Cold start
Y
-
Form factor
Rackmount
-
Product colour
Black, Grey
-
Rack capacity
3U
-
Display type
LCD
-
LED indicators
Status
-
International Protection (IP) code
IP20
-
Certification
CE, EAC, RCM, VDE
-
Operating temperature (T-T)
0 - 40 °C
-
Storage temperature (T-T)
-20 - 50 °C
-
Operating relative humidity (H-H)
0 - 95%
-
Storage relative humidity (H-H)
0 - 95%
-
Operating altitude
0 - 3000 m
-
Non-operating altitude
0 - 15000 m
-
Harmonized System (HS) code
85078000
-
Width
432 mm
-
Depth
590 mm
-
Height
128 mm
-
Weight
25.7 kg
-
Package width
600 mm
-
Package depth
850 mm
-
Package height
445 mm
-
Package weight
37.4 kg
-
Products per pallet
6 pc(s)
-
Output voltage
230 V
