on your rights under the UK GDPR.
Highlights
Tripp Lite’s SMX700HG medical-grade UPS system provides dependable battery backup and is fully compliant with UL 60601-1 regulations when plugged into a hospital-grade outlet, making it ideal for use in patient-care vicinities. The 700VA/450W capacity provides up to 36 minutes of runtime for a half load, or 14.5 minutes for a full load so you can work through short power failures and perform an orderly system shutdown in a prolonged blackout. Built-in line-interactive voltage regulation corrects brownouts as low as 155V and overvoltages as high as 274V to normal 230V nominal output, without drawing battery power. The SMX700HG’s built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes. Cumulative leakage current of all connected equipment is less than 100 microamps. This UPS system features six IEC320 C13 hospital-grade outlets and has a hospital-grade IEC320 C14 plug on a 15 cm (6 in.) dongle. All six outlets provide both backup protection and surge protection, rated to 340 joules. The SMX700HG also features diagnostic LEDs, as well as a USB port and a DB9 serial port that work with Tripp Lite’s free downloadable PowerAlert software for safe, unattended system shutdown and file saves in the event of a prolonged power failure. Application Usage This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile cart applications where the UPS is often disconnected from the power source. Using the SMX700HG in this type of application will void the battery warranty. Provides Ideal UPS Backup in Healthcare Facilities Compliant with UL 60601-1 standards for use in patient-care vicinities, when plugged into a hospital-grade outlet Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise Battery Backup and Full Surge Protection 36 minutes runtime for half load (225W); 14.5 minutes for full load (450W) All six hospital-grade outlets provide surge protection rated to 340 joules EMI/RFI noise filtering ensures equipment runs smoothly without line noise interference Resistant to electrostatic discharge LEDs and Audible Alarms Keep You Aware of Power Status Indicator lights on the front of the unit show you when the UPS is on and supplying utility power, when operating in voltage correction mode or in battery mode, relative load level and low-battery warning Audible alarms alert you to power failure, overload and low battery conditions; the alarm’s mute/quiet mode ensures patients are not disturbed Saves Your Files, Even When You’re Away Works with Tripp Lite PowerAlert software (available as a free download) to enable safe, unattended system shutdown and files saves during prolonged power failures Connects to your computer via either the DB9 port or USB portSpecifications
-
Output power capacity
0.7 kVA
-
Output power
450 W
-
Input operation voltage (min)
220 V
-
Input operation voltage (max)
240 V
-
Input frequency
50/60 Hz
-
Output operation voltage (min)
230 V
-
Output operation voltage (max)
230 V
-
Maximum current
3.6 A
-
Surge energy rating
340 J
-
Response time
5 ms
-
EMI/RFI noise filtering
Y
-
Audible alarm(s)
Y
-
Country of origin
China
-
AC outlet types
C13 coupler
-
Power plug
C14 coupler
-
AC outlets quantity
6 AC outlet(s)
-
USB 2.0 ports quantity
1
-
RS-232 ports
1
-
Typical backup time at full load
14.5 min
-
Typical backup time at half load
36 min
-
Battery recharge time
3.6 h
-
Hot-swap battery
Y
-
Cold start
Y
-
Form factor
Tower
-
Product colour
White
-
Housing material
Polyvinyl chloride (PVC)
-
Cable length
1.83 m
-
Cooling type
Active
-
LED indicators
Y
-
Certification
CE/IEC 60601-1, FCC B
-
Operating temperature (T-T)
0 - 40 °C
-
Storage temperature (T-T)
-15 - 50 °C
-
Operating relative humidity (H-H)
0 - 95%
-
Sustainability certificates
RoHS
-
Width
190.5 mm
-
Depth
229.9 mm
-
Height
322.6 mm
-
Weight
19.1 kg
-
Package width
309.9 mm
-
Package depth
339.9 mm
-
Package height
469.9 mm
-
Package weight
20.6 kg
-
Products per master (outer) case
1 pc(s)
-
Nominal input voltage
230 V
-
Package dimensions (WxDxH)
310 x 340 x 470 mm
