on your rights under the UK GDPR.
Highlights
The IS1800HGDV Isolator® Series Dual-Voltage 115/230V 1800W 50/60Hz Medical-Grade™ Transformer with full CAN/ES/IEC/EN 60601-1 listing is ideal for protecting sensitive electronic equipment in patient-care vicinities. It can be configured for either step-up voltage, step-down voltage or pass-through voltage operation. Along with line isolation and continuous EMI/RFI line noise filtering, its surge protection rating of 240 joules suppresses excess voltage to prevent it from damaging connected equipment. An internal low-impedance isolation transformer component offers 100% isolation from the input mains AC line. Faraday shield reduces the cumulative leakage current of the IS1800HGDV and connected equipment to levels less than 100 microamps, while removing utility switching transients and harmonics generated by other on-site loads and reducing the impact of utility-related surge conditions. Transformer filtering provides continuous common-mode noise rejection with no wearable parts. The IS1800HGDV reduces 6000V IEEE 587 Category A and B ring wave and combination wave test surges to only 0.5V common mode. Components connect to eight C13 outlets with fuse overload protection and a lighted on/off switch. The rugged all-metal unit housing ships ready for placement in any industrial, medical, office, network or audio/video environment. Requires a C19 AC input cord with country specific plug (sold separately). Full CAN/ES/IEC/EN 60601-1 Medical-Grade Listing with C20 Inlet and 8 C13 Outlets Ideal for protecting sensitive electronic equipment in patient-care vicinities Reduces cumulative leakage current of Isolator and connected equipment to levels less than 100 µA Inexpensive alternative to dedicated circuits and site electrical upgrades Rugged all-metal housing designed to withstand frequent use in busy environments Requires a C19 AC input cord with country specific plug (sold separately). Selectable 115/230V Input/Output Voltage Suitable for Most Applications Step-up, step-down or pass-through voltage operation (input frequency always equals output frequency) Internal low-impedance toroidal isolation transformer with Faraday shield offers 100% isolation from mains AC power line Automatically shuts down all outlets in case of overload Ships ready for placement in any industrial, medical, office, network or audio/video environment Protects Connected Equipment from Dangerous Spikes, Surges and Line Noise Line isolation, continuous noise filtering and 240 joules of AC surge protection Removes EMI/RFI noise, utility switching transients, load-generated harmonics and ground loops Floating AC output prevents noise coupling from noisy ground circuits Reduces 6000V IEEE 587 Category A and B ring wave and combination wave test surges to only 0.5V common modeSpecifications
-
AC inlet type
C20 coupler
-
AC outlet types
C13
-
AC outlets quantity
8 AC outlet(s)
-
AC input voltage
115 - 230 V
-
AC input frequency
50 - 60 Hz
-
Input current (max)
15 A
-
Short circuit protection
Y
-
Load capacity
1800 VA
-
Housing colour
White
-
Certification
ANSI/AAMI ES60601-1:2005+A2+A1, IEC60601-1 3RD EDITION +A1, cAN/CSA-C22.2 NO. 60601-1:14, CE, NOM
-
Operating temperature (T-T)
0 - 40 °C
-
Storage temperature (T-T)
-15 - 50 °C
-
Operating relative humidity (H-H)
5 - 95%
-
Operating altitude
0 - 3000 m
-
Width
300 mm
-
Depth
350 mm
-
Height
140 mm
-
Weight
23.5 kg
-
Package width
445 mm
-
Package depth
500.1 mm
-
Package height
279.9 mm
-
Package weight
23.2 kg
-
Products per master (outer) case
1 pc(s)
-
Master (outer) case width
445 mm
-
Master (outer) case length
500.1 mm
-
Master (outer) case height
279.9 mm
-
Master (outer) case gross weight
23.2 kg
-
Country of origin
Taiwan
-
Warranty Info
2-year limited
